Showing 61–69 of 69 results
-

This project is a DIY R36(H) Dock Station, also known as the SystemR36 Dock.
This dock station (depending on which features you decide to include in your build) includes the following features:
– Charging Port for the R36
– 4 Port USB (A) Hub
– Built-in amplifier + 40mm Stereo speakers
– Serial Port for the serial console
The USB hub and amplifier are externally powered and will not rely on the power delivery of the R36 its USB (OTG) port, and thus also not “stress-out” the R36 it’s (fairly weak) USB and power regulator circuits
For me this Dock Station is the PERFECT ‘companion’ during development of my R36 applications and distro, it’s also perfect match (even designed to be matched with) for the XNL R36 ModChip when using the serial port feature.
The entire project is HEAVILY documented with a step-by-step PDF with hand-drawn illustrations (no AI was used all for this project, which also includes it’s illustrations, documentation etc). Next to this I’ve also made a (simplified) video where I build my dock station(s) on YouTube, which you can find here: R36H DIY Dock Station Video
Download Size: 10MB
-

The XNL R36 ModChip is a module which is intended to be build into the R36H Retro Console so that you have Wifi build-into the R36 (with the option to include an physical on/off switch) while still being able to use the external USB port at the same time (for example for a USB controller, USB stick etc). It also enables you install a secondary USB module if desired for personal experiments (for example Bluetooth*), and it enables you to use the onboard UART of the R36 for development and/or hacking purposes.
*Bluetooth is not officially supported and neither do I provide assistance in setting it up, but more about this in the documentation (PDF in the download).
This module is officially only intended to be used with the R36H, but could also be installed in an R36S. However, installing it in an R36S requires significant more expertise from the modder installing it and it also introduces significantly more risk in permanently damaging the board if you don’t know what you’re doing. This is also the reason why the R36S isn’t officially ‘supported by this module’!
PROJECT VIDEO LINK
Download Size: 22MB
-

Ever “needed” to hook-up some wires to the ‘SIM Card Socket’ of a mobile phone for one of your ‘Sketchy Projects’, but didn’t wanted to solder wires onto the ‘pins’?
Well then maybe this little board might be just what you need for those ‘sketchy SIM Port Projects’ ;)
Download Size: 17kb
-

The XNL STAR-3 is our own ‘answer’ on the commonly known (Chinese) BluePill development board.
The XNL STAR-3 is an (72MHz) ARM® Cortex®-M3 based development board, developed to offer a more ‘developer friendly’ experience than with the commonly used (Chinese) Blue Pill boards.
Quick Overview Specs:
• 72MHz ARM® 32-bit Cortex®-M3
• 64KB or 128KB Flash (program) Memory
• 20KB SRAM
• RTC (With onboard battery)
Download Size: 2.5MB
-

The XNL STAR-3-MB is basically a ‘motherboard’ for the commonly known (Chinese) BluePill development boards.
While at the same time also providing a very easy, fast and convenient way to ‘snap-in-and-flash’ (bootload) your BluePill board without needing additional USB->Serial boards or other flash tools/sticks.
During development the XNL STAR-3-MB also gives you instant access to the USB port of the BluePill itself, an additional USB port which functions as a USB->Serial adapter for TX1 & RX1, an onboard RTC Battery and a (more stable) 3.3V ‘power supply’ for your external 3.3V components and/or modules.
Download: 2.5MB
-

This is our mirror of the XNL STAR-3 Bootloader bin file.
This bootloader can (also) be used for:
– XNL STAR-3 Boards
– XNL STAR-3-MB Boards
– STM32 Blue Pill boards
– Most other boards using an STM32F103C8
– Most other boards using an STM32F103CB
IMPORTANT NOTE:
This is a backup mirror to ensure that you always have access to the version/bootloader which we recommend. Make sure to check the Information Tab to see if the original author has a more recent version!
Download Size: 13KB
-

These are a mirror of the (USB) drivers for the XNL STAR-3 and several other STM32 based boards.
These drivers can also be used for:
– XNL STAR-3-MB Boards
– STM32 Blue Pill boards
– Most other boards using an STM32F103C8
– Most other boards using an STM32F103CB
Download Size: 22MB
-

20 years ago (as of 2024) I wrote TextSpec 2.0B which was used to count words, characters and lines in a pasted (plain) text. Simply because lots of people I knew back then didn’t had Microsoft Word on their home computer, or they just wanted a small (quickly starting) tool to get this information about a piece of text fast and efficiently.
In honor of the 20 year old version I decided to completely rewrite TextSpec from scratch in .NET with a lot more features, accuracy and other improvements.
Interested in what this new modernized version has to offer and why I decided to rewrite it again? Make sure to check the information bellow for more details 😊
Download: 396KB (Program/Binaries)
Download: 470KB (Source Code)
-

The XNL WESP is our (simple) solution to work with the ESP-12E boards using our XNL LABUNO’s. It basically ‘converts’ your ESP-12E modules into a ‘mini development board’ when used in combination with our LABUNO’s.
This is however not a full (stand-alone) development board, officially put this is ‘just a breakout board’!
NOTE: The download for the XNL WESP also contains the official datasheet of the ESP-12E
“Multi Pack” NOTE:
The (NON USB) XNL LABUNO download also contains a panelized version of the XNL LABUNO which includes two XNL Logic Monitors, an XNL ESP Direct Board, and an XNL WESP Board which means that it might actually be cheaper to order the panelized version (if your PCB Manufacturer allows pre-panelized boards) if you need or want all modules.