XNL Legacy Projects & Products

Most of the projects and or products in this category are no longer available for the public to download! In general projects or products will not ‘just end up here’, and most of them will be projects from my previous platform(s).

However the projects and/or products in this category are only available for a select group of users (which already have been using these projects/products in the past).

The reason that they are still publicly visible (and not just to the users who are ‘registered as previous owners’) is because not all users have transferred over from the old (which was a closed platform) to the new public XNL Future Technologies platform. And this way those old users will still be able to find the software for their (still running) projects/products if they need it.

MOST (not all though) previous users will automatically be recognized if they sign in on the new platform, if your ‘re-signup-period’ has ‘expired’ then please just contact us and we will make sure (by validating your previous membership against your new one) that you will get access to the files again :)

Please do understand that (by far) not all projects and/or products from the old (closed) platform have made it onto the new publicly open platform of XNL Future Technologies. We will do our best to bring back the most requested and used projects and products, but do understand that this will take a lot of time and that this will also still be a very limited selection of projects and products!

PLEASE NOTE:
It has no use to ask for access to these projects and/or files if your account doesn’t already have access to them (or if your previous from the closed platform account didn’t had access to them), because there are many reasons why these projects are no longer being supported, maintained or available.

This could be that there where flaws in them, they could have been succeeded by better projects/products, they just became outdated, where just made for a specific (smaller) group of users or anything alike. Please understand that these are only here for archive reasons and to keep them available for previous users.

Showing all 7 results

  • XNL 3D Pro Firmware 26.3i (32-Bit) Binary

    IMPORTANT
    This firmware is (now) Legacy Firmware with limited availability meaning it is no longer available for public download. Only users whom have been using this firmware and/or the XNL 3D Pro, can still access this download and/or possible future updates (if any).

    This is the official 32-Bit XNL Firmware for the XNL 3D Pro which have the 32-Bit boards.

    You can find the 8-Bit version here
    And you can find the source of this (32-Bit) firmware here

    Please consult the information bellow to see if your XNL 3D Pro is supported by this firmware prior to downloading or even flashing it!

    Download: 148KB

  • XNL 3D Pro Firmware 26.3i (8-Bit)

    IMPORTANT
    This firmware is (now) Legacy Firmware with limited availability meaning it is no longer available for public download. Only users whom have been using this firmware and/or the XNL 3D Pro, can still access this download and/or possible future updates (if any).

    This is the official 8-Bit XNL Firmware for the XNL 3D Pro which have the 8-Bit boards.

    Please consult the information bellow to see if your XNL 3D Pro is supported by this firmware prior to downloading or even flashing it!

    NOTE: This download require 7-zip to extract it!

    Download: 99MB

  • XNL 3D Pro Firmware Source 26.3i (32-Bit)

    IMPORTANT
    This firmware is (now) Legacy Firmware with limited availability meaning it is no longer available for public download. Only users whom have been using this firmware and/or the XNL 3D Pro, can still access this download and/or possible future updates (if any).

    This is the official 32-Bit XNL Firmware for the XNL 3D Pro which have the 32-Bit boards.

    You can find the 8-Bit version here
    And you can find the Bin file (to flash it directly via SD-Card) here

    Please consult the information bellow to see if your XNL 3D Pro is supported by this firmware prior to downloading or even flashing it!

    NOTE: This download require 7-zip to extract it!

    Download: 5.5MB

  • XNL 3D Pro GuardDog Enclosure (Ender 3 Frame Compatible)

    Please note:
    This is a legacy download which is intended for a very specific group of users, and you most likely don’t need this download ;)

    I did decided to make this legacy download available for others though, because I thought it might be useful for other ‘heavy modders’ of their Ender 3 (V1)’s

    Please do note that there is absolutely no support or whatever on or for this project/download!

    Please also make sure to read the description bellow before downloading it.

    Download: 63KB

  • XNL 3D Pro Mainboard Enclosure (Ender 3 mainboard housing [v1])

    Please note:
    This is officially a ‘legacy project‘, meaning it’s no longer supported or available.

    However since there are still quite a few Creality Ender 3 V1 (literally the first series) owners out there, I decided to (re-)upload this legacy housing to the new platform.

    This replacement enclosure can be used to replace the metal enclosure and perfectly fits the original 8-bit Ender 3 main board.

    This download (as of 2024) also contains a version which has no logo’s on the outside of the enclosure

    Download: 430KB

  • XNL 3D Pro Touchscreen Interface 1.6

    IMPORTANT
    This software/interface is (now) Legacy Software with limited availability meaning it is no longer available for public download. Only users whom have been (or are still) using the XNL 3D Pro can still access this download and/or possible future updates.

    This is the official XNL 3D Pro Touchscreen Interface which is used (and needed) to get the maximum potential out of your XNL 3D Pro.

    Please read the additional information bellow if you need information on a replacement tablet for example.

    Current Version: 1.5

    Download: 1.8MB

  • EoL

    XNL AVR ICSP/ISP Programmer (Arduino as ISP)

    This small board is what I/we’ve used for a long time when we needed to boot-load our newly arrived Atmega328’s, often we used this board together with the XNL ISP Speed Flash Board to flash and/or boot-load all kinds of different AVR’s for our projects.

    These days we however don’t use (or support) it anymore, simply because the XNL LABUNO Overkill Edition has an ISP Programmer build-in, which also has it’s own onboard USB controller, which means we don’t have to connect it to an USB to Serial adapter first (like the XNL F.U.T.S.).

    NOTE: The larger (red) board shown in the photo’s is the XNL ISP Speed Flash Board which is not included in this download!

    Download Size: 1.75mb